top of page

T-Stop vs F-Stop: What’s the Difference? And do we Really Need To Know it?

One of the first things that you come across in photography is the F-stop. F-stops, as a measurement of the lens, are an essential part of exposure. You should also know about the T-Stop.

Let’s take a look at T-stop vs f-stop and find out the differences.

What Does F-Stop Mean?

Every lens has an entrance pupil. The entrance pupil is the part of the lens where the aperture is located (and not the front of the lens). Its diameter is usually slightly smaller than the diameter of the front glass element.

The f-stop is a ratio, the ratio of the focal length compared to the diameter of the entrance pupil. You can get it by dividing the focal length by the diameter.

So, if your focal length is 50mm, and the diameter is 25mm, you’ve got an f/2 lens. If you close the aperture down, that pupil diameter narrows and less light can pass. The f-stop marked on your lens is the highest value.

But, there’s a lot more to light transmittance than the f-stops ratio. There are many factors: the quality of glass, the number of lens elements, the amount of reflection inside the barrel. They all influence how much light reaches the sensor.

In consequence, the f-stop is only proportional to the amount of light passing. It’s not an absolute value.

What Does T-Stop Mean?

This is where the T-stop comes in handy. It is the f-stop corrected by the actual ratio light transmittance.

You can calculate it by dividing the f-stop of the lens by the square root of light transmittance. So, let’s suppose we have a lens with a maximum aperture of 2.8, and 90% of the light goes through. We divide 2.8 by √0.90. The resulting value is 2.953, which we can round up to T/3.0.

How Can We Determine the Exact Transmittance?

There is, unfortunately, no formula that tells us the exact transmittance. If we want to know the precise amount of light getting through, we have to measure it.

But it’s not something you can do at home. It’s a meticulous process, requiring a lot of testing and investment.

Some studios do light transmittance measuring themselves, but it’s generally not 100% accurate. Take a look at DXOmark’s database to compare lenses based on their T-stop.

Which Lenses Have the Highest Transmittance?

The more elements there are in a lens, the lower the transmittance it has. Every lens element decreases it a little bit.

So, for example, zoom lenses have lower transmittance than primes.

Much depends on the quality of glass and build as well. Cheaper lenses usually have worse quality glass in them. That means (among other things) that they let less light pass than more expensive optics.

There are exceptions, of course. For example, Rokinon’s manual focus lenses are not only of very high quality, but they even have their cinema lens counterparts.

Build quality inside the lens counts, as well. With better treatment for internal reflections, less light will get lost.

What Is the Purpose of T-stops?

There are many reasons why you don’t see T-stops in your everyday photography.

One reason is that it is expensive to measure accurately. So, companies don’t even test their cheaper lenses for transmittance.

The other is that in photography, f-stops are more practical. Today, every digital camera has built-in metering and high ISO performance. So you hardly notice the difference between a T3.2 and T2.9 lens (if both F/2.8), because your camera corrects for that.

The field where T-stops are much more usable is video production.

Using T-Stop to Avoid Exposure Differences With Cinema Lenses

When you are always switching angles, it is crucial to avoid exposure differences between them. The easiest way to achieve this is by using lenses with the same T-stop.

Cinema lenses are marked with their T-stop instead of an f-stop. Cinema lens lines also share the same casing and weight. This feature makes balancing and fitting accessories on them easier for cinematographers. Also, they feature pullable focusing and zoom rings.

The optics inside these cinema lenses do not differ much from photography lenses. Take a look at Canon’s 50mm f/1.2 and 50mm t1.3 lenses – they have very similar optics in two different barrels.


If you never had to bother with T-stops, you will likely not use them from now on either. But, it is useful to know about T-stops to avoid misconceptions.

60 views0 comments

Recent Posts

See All


bottom of page